Improvement of Phased Antenna Array Applied in Focused Microwave Breast Hyperthermia.

Focused microwave breast hyperthermia (FMBH) employs a phased antenna array to perform beamforming that can focus microwave energy at targeted breast tumors. Selective heating of the tumor endows the hyperthermia treatment with high accuracy and low side effects. The effect of FMBH is highly dependent on the applied phased antenna array. This work investigates the effect of polarizations of antenna elements on the microwave-focusing results by simulations. We explore two kinds of antenna arrays with the same number of elements using different digital realistic human breast phantoms. The first array has all the elements' polarization in the vertical plane of the breast, while the second array has half of the elements' polarization in the vertical plane and the other half in the transverse plane, i.e., cross polarization. In total, 96 sets of different simulations are performed, and the results show that the second array leads to a better focusing effect in dense breasts than the first array. This work is very meaningful for the potential improvement of the antenna array for FMBH, which is of great significance for the future clinical applications of FMBH. The antenna array with cross polarization can also be applied in microwave imaging and sensing for biomedical applications.

Blocking Interfacial Proton Transport via Self-Assembled Monolayer for Hydrogen Evolution-Free Zinc Batteries.

Aqueous Zn-ion batteries (ZIBs) are promising next-generation energy storage devices, yet suffer from the issues of hydrogen evolution reaction (HER) and intricate side reactions on the Zn anode surface. The hydrogen (H)-bond networks play a critical role in interfacial proton transport that may closely relate to HER but are rarely investigated.Herein, we report a self-assembled monolayer (SAM) strategy which is constructed by anchoring ionic liquid cations on Ti3C2Tx substrate for HER-free Zn anode. Molecule dynamics simulations reveal that the rationally designed SAM with a high coordination number of water molecules (25~27, 4~6 for Zn2+) largely reduces the interfacial densities of H2O molecules, therefore breaking the connectivity of H-bond networks and blocking proton transport on the interface, by which the HER is suppressed. Then, a series of in-situ characterizations demonstrate that negligible amounts of H2 gas are collected from the Zn@SAM-MXene anode. Consequently, the symmetric cell enables a long-cycling life of 3000 h at 1 mA cm-2 and 1000 h at 5 mA cm-2. More significantly, the stable Zn@SAM-MXene films are successfully used for coin full cells showing high-capacity retention of over 94% after 1000 cycles and large-area (10 × 5 cm2) pouch cells with desired performance.

Harzianic acids and oxazolidinone from the endophytic fungus Ilyonectria sp. and their cytotoxicity activity.

Four undescribed compounds including three harzianic acids (1, 3 and 4) and one oxazolidinone (2), along with three known ones (5-7) were isolated from the solid fermented product of endophytic fungus Ilyonectria sp., their structures were elucidated as 1-amino-harzianic acid (1), ilyonectria-oxazolidinone (2),10'-nor- isoharzianic acid (3), isohomoharzianic acid (4), harzianic acid (5), isoharzianic acid (6), homoharzianic acid (7) by means of detailed chemical evidences and spectroscopic data analysis. All the compounds were evaluated for cytotoxicity against SMMC-7721 human cancer cell lines by MTS assay. Among the seven tested compounds, 1-amino-harzianic acid (1) demonstrated well cytotoxic activity against SMMC-7721 with IC50 value of 26.84 µM. The results of molecular docking indicated that compound exhibited moderate anti-tumor activity may through binding to apoptosis related proteins.

Electrochemical Continuous-Flow Scholl Reaction toward Polycyclic Aromatic Hydrocarbons.

The preparation of polycyclic aromatic hydrocarbons (PAHs) by the Scholl reaction is typically performed by using superstoichiometric oxidants. Herein, we develop an electrochemical continuous-flow Scholl reaction to access PAHs that features a reduction in the use of supporting electrolytes and easy scale-up without changing the reaction conditions and setups. This reaction allows the synthesis of distorted PAHs containing three [5]helicene units that possess intriguing electronic and optical properties.

Cobalt-catalyzed amination of aziridines and azetidines toward 1,2- and 1,3-diamines.

Diamines play important roles in synthetic organic chemistry and thus facilitate life and materials sciences. Herein we report a cobalt-catalyzed ring opening, nucleophilic amination of aziridines and azetidines with N-fluorosulfonamides toward a wide range of 1,2- and 1,3-diamine derivatives in moderate to good yields under mild conditions.

Consolidation chemotherapy after definitive concurrent chemoradiotherapy in patients with inoperable esophageal squamous cell carcinoma: a multicenter non-inferiority phase III randomized clinical trial.

BACKGROUND: Definitive concurrent chemoradiotherapy (dCCRT) is the gold standard for the treatment of locally advanced esophageal squamous cell carcinoma (ESCC). However, the potential benefits of consolidation chemotherapy after dCCRT in patients with esophageal cancer remain debatable. Prospective randomized controlled trials comparing the outcomes of dCCRT with or without consolidation chemotherapy in patients with ESCC are lacking. In this study, we aim to generate evidence regarding consolidation chemotherapy efficacy in patients with locally advanced, inoperable ESCC. METHODS: This is a multicenter, prospective, open-label, phase-III randomized controlled trial comparing non-inferiority of dCCRT alone to consolidation chemotherapy following dCCRT. In total, 600 patients will be enrolled and randomly assigned in a 1:1 ratio to receive either consolidation chemotherapy after dCCRT (Arm A) or dCCRT alone (Arm B). Overall survival will be the primary endpoint, whereas progression-free survival, locoregional progression-free survival, distant metastasis-free survival, and treatment-related toxicity will be the secondary endpoints. DISCUSSION: This study aid in further understanding the effects of consolidation chemotherapy after dCCRT in patients with locally advanced, inoperable ESCC. TRIAL REGISTRATION: ChiCTR1800017646.

Iron-doping and facet engineering of NiSe octahedron for synergistically enhanced triiodide reduction activity in photovoltaics.

Reasonable design of cost-effective counter electrode (CE) catalysts for triiodide (I3-) reduction reaction (IRR) by simultaneously combining heteroatom doping and facet engineering is highly desired in iodine-based dye-sensitized solar cells (DSSCs), but really challenging. Herein, the density function theory (DFT) calculations were first conducted to demonstrate that the Fe-doped NiSe (111) showed an appropriate adsorption energy for I3-, increased number of metal active sites, reinforced charge-transfer ability, and strong interaction between 3d states of metal sites and 5p state of I1 atoms in I3-, compared to NiSe (111). Based on this finding, the well-defined Fe-NiSe octahedron with exposed (111) plane (marked as Fe-NiSe (111)) and NiSe octahedron with the same exposed plane (named as NiSe (111)) are controllably synthesized. When the as-prepared Fe-NiSe (111) and NiSe (111) worked as CE catalysts, Fe-NiSe (111) exhibits improved electrochemical performance with higher power conversion efficiency (PCE) than NiSe (111), providing new opportunity to replace precious Pt for DSSCs.

Current-Controlled Electrochemical Approach Toward Mono- and Trifluorinated Isoindolin-1-one Derivatives.

An electrochemical intramolecular 5-exo-dig aza-cyclization of 2-alkynylbenzamides and subsequent nucleophilic fluorination have been developed to afford the highly selective synthesis of mono- and trifluorinated isoindolin-1-one derivatives. This work demonstrates the unique capability of synthetic electrochemistry in controlling reaction selectivity through the applied electrolytic parameters. In addition, the obtained monofluorinated 3-methyleneisoindolin-1-one (19) displays interesting photophysical properties that are not observed in its nonfluorinated analog.

Electrochemical cascade migratory versus ortho-cyclization of 2-alkynylbenzenesulfonamides.

Efficient control over several possible reaction pathways of free radicals is the chemical basis of their highly selective transformations. Among various competing reaction pathways, sulfonimidyl radicals generated from the electrolysis of 2-alkynylbenzenesulfonamides undergo cascade migratory or ortho-cyclization cyclization selectively. It is found that the incorporation of an extra 2-methyl substituent biases the selective migration of the acyl- over vinyl-linker of the key spirocyclic cation intermediate and thus serves as an enabling handle to achieve the synthetically interesting yet under-investigated cascade migratory cyclization of spirocyclic cations.

Machine Learning Prediction of Molecular Binding Profiles on Metal-Porphyrin via Spectroscopic Descriptors.

The study of molecular adsorption is crucial for understanding various chemical processes. Spectroscopy offers a convenient and non-invasive way of probing structures of adsorbed states and can be used for real-time observation of molecular binding profiles, including both structural and energetic information. However, deciphering atomic structures from spectral information using the first-principles approach is computationally expensive and time-consuming because of the sophistication of recording spectra, chemical structures, and their relationship. Here, we demonstrate the feasibility of a data-driven machine learning approach for predicting binding energy and structural information directly from vibrational spectra of the adsorbate by using CO adsorption on iron porphyrin as an example. Our trained machine learning model is not only interpretable but also readily transferred to similar metal-nitrogen-carbon systems with comparable accuracy. This work shows the potential of using structure-encoded spectroscopic descriptors in machine learning models for the study of adsorbed states of molecules on transition metal complexes.

Novel insights into the effects of 5-hydroxymethfurural on genomic instability and phenotypic evolution using a yeast model.

5-Hydroxymethfurural (5-HMF) is naturally found in a variety of foods and beverages and represents a main inhibitor in the lignocellulosic hydrolysates used for fermentation. This study investigated the impact of 5-HMF on the genomic stability and phenotypic plasticity of the yeast Saccharomyces cerevisiae. Using next-generation sequencing technology, we examined the genomic alterations of diploid S. cerevisiae isolates that were subcultured on a medium containing 1.2 g/L 5-HMF. We found that in 5-HMF-treated cells, the rates of chromosome aneuploidy, large deletions/duplications, and loss of heterozygosity were elevated compared with that in untreated cells. 5-HMF exposure had a mild impact on the rate of point mutations but altered the mutation spectrum. Contrary to what was observed in untreated cells, more monosomy than trisomy occurred in 5-HMF-treated cells. The aneuploidy mutant with monosomic chromosome IX was more resistant to 5-HMF than the diploid parent strain because of the enhanced activity of alcohol dehydrogenase. Finally, we found that overexpression of ADH6 and ZWF1 effectively stabilized the yeast genome under 5-HMF stress. Our findings not only elucidated the global effect of 5-HMF on the genomic integrity of yeast but also provided novel insights into how chromosomal instability drives the environmental adaptability of eukaryotic cells.IMPORTANCESingle-cell microorganisms are exposed to a range of stressors in both natural and industrial settings. This study investigated the effects of 5-hydroxymethfurural (5-HMF), a major inhibitor found in baked foods and lignocellulosic hydrolysates, on the chromosomal instability of yeast. We examined the mechanisms leading to the distinct patterns of 5-HMF-induced genomic alterations and discovered that chromosomal loss, typically viewed as detrimental to cell growth under most conditions, can contribute to yeast tolerance to 5-HMF. Our results increased the understanding of how specific stressors stimulate genomic plasticity and environmental adaptation in yeast.

Biochemical and Structural Characterization of OvoATh2: A Mononuclear Nonheme Iron Enzyme from Hydrogenimonas thermophila for Ovothiol Biosynthesis.

Ovothiol A and ergothioneine are thiol-histidine derivatives with sulfur substitutions at the δ-carbon or ε-carbon of the l-histidine imidazole ring, respectively. Both ovothiol A and ergothioneine have protective effects on many aging-related diseases, and the sulfur substitution plays a key role in determining their chemical and biological properties, while factors governing sulfur incorporation regioselectivities in ovothiol and ergothioneine biosynthesis in the corresponding enzymes (OvoA, Egt1, or EgtB) are not yet known. In this study, we have successfully obtained the first OvoA crystal structure, which provides critical information to explain their C-S bond formation regioselectivity. Furthermore, OvoATh2 exhibits several additional activities: (1) ergothioneine sulfoxide synthase activity akin to Egt1 in ergothioneine biosynthesis; (2) cysteine dioxygenase activity using l-cysteine and l-histidine analogues as substrates; (3) cysteine dioxygenase activity upon mutation of an active site tyrosine residue (Y406). The structural insights and diverse chemistries demonstrated by OvoATh2 pave the way for future comprehensive structure-function correlation studies.

Improving the Efficiencies of Water Splitting and CO2 Electrolysis by Anodic O2 Bubble Management.

This study systematically explores the impact of the anodic flow field design on the transport of O2 bubble and subsequent energy efficiency in electrolysis devices. Two distinct configurations, namely a conventional serpentine flow panel and an interdigitated flow panel, are integrated at the anode side of the electrolyzer. The interdigitated flow field exhibits superior performance in both alkaline water splitting and CO2 reduction despite the experience of an increased pressure drop. Numerical simulations reveal that the enhanced convective flow of the O2 bubbles induced by a forced anolyte flow through the porous electrode within the interdigitated panel design resulted in a 3 orders of magnitude increase in the level of the O2 bubble transport compared to the serpentine configuration. These findings not only underscore the significance of flow field design on bubble management but also provide a basis for advancing the electrolysis efficiency at industrial-level current densities.

Discovery of Novel PD-L1 Inhibitors That Induce the Dimerization, Internalization, and Degradation of PD-L1 Based on the Fragment Coupling Strategy.

Tumor cells can evade immune surveillance through overexpressing programmed cell death-ligand 1 (PD-L1) to interact with programmed cell death-1 (PD-1). Besides, tumor-intrinsic PD-L1 is involved in tumor progression without interaction with PD-1, which provides more challenges for the discovery of PD-L1 inhibitors. Herein, we report the discovery of novel PD-L1 inhibitors using the fragment coupling strategy. Among them, B9 was found to inhibit the PD-1/PD-L1 interaction with the best IC50 value of 1.8 ± 0.7 nM. Beyond the blockade of the PD-1/PD-L1 axis, B9 promotes the dimerization, internalization, and degradation of PD-L1. Furthermore, B9 displayed high in vivo antitumor efficacy in the CT26 mouse model and activated the immune microenvironment and induced PD-L1 degradation of PD-L1 in the tumor. These results show that B9 is a promising lead PD-L1 inhibitor through the blockade of PD-1/PD-L1 interaction and functional inhibition of the PD-L1 signal pathway.

Catalytic Structure Design by AI Generating with Spectroscopic Descriptors.

Generative artificial intelligence has depicted a beautiful blueprint for on-demand design in chemical research. However, the few successful chemical generations have only been able to implement a few special property values because most chemical descriptors are mathematically discrete or discontinuously adjustable. Herein, we use spectroscopic descriptors with machine learning to establish a quantitative spectral structure-property relationship for adsorbed molecules on metal monatomic catalysts. Besides catalytic properties such as adsorption energy and charge transfer, the complete spatial relative coordinates of the adsorbed molecule were successfully inverted. The spectroscopic descriptors and prediction models are generalized, allowing them to be transferred to several different systems. Due to the continuous tunability of the spectroscopic descriptors, the design of catalytic structures with continuous adsorption states generated by AI in the catalytic process has been achieved. This work paves the way for using spectroscopy to enable real-time monitoring of the catalytic process and continuous customization of catalytic performance, which will lead to profound changes in catalytic research.

Leveraging Interlayer Interaction in M-N-C Catalysts for Enhanced Activity in Oxygen Reduction Reactions.

Atomically dispersed metal-nitrogen-carbon (M-N-C) materials are deemed promising catalysts for the oxygen reduction reaction (ORR) in fuel cells. Yet the multilayer nature of M-N-C has been largely neglected in computational analysis. To bridge the gap, we conducted a first-principles investigation using bilayer M-N-C models (TMNx/G-TMNy/G, TM = Mn, Fe, Co, Ni, Cu, G = graphene, x, y = 3 or 4), where the TMs on the top serves as the active center. While in-plane TMN4 at the bottom has a minimal impact on the ORR, out-of-plane TMN3 substantially influences the adsorption free energy of OH through a strong interlayer bonding interaction. By leveraging interlayer interactions, we appreciably lowered the overpotential of selected TMN4 (TM = Co, Ni, Cu) and achieved a minimum of 0.40 V on CoN4/G-CuN3/G. Constant potential calculations revealed weak dependence of OH binding energy on external voltage and obtained results comparable to constant charge calculation. This study provided new physical insight into modulating naturally occurring multilayer M-N-C catalysts.

Customizing Catalyst/Ionomer Interface for High-Durability Electrode of Proton Exchange Membrane Fuel Cells.

Commercialization applications of proton exchange membrane fuel cells (PEMFCs) are throttled by the durability issues of the electrodes prepared by using catalyst inks. Probing into a desirable catalyst/ionomer interface by adjusting the catalyst inks is an effective way for obtaining high-durability electrodes. The present study investigated quantitatively the catalyst/ionomer interfaces based on the viscosity (η) property of the isopropyl alcohol (IPA) and dipropylene glycol (DPG) nonaqueous mixture solvent for the first time. Accelerated stress test (AST) showed that η as one of the characteristic parameters of the solvent had a threshold effect on the durability of electrodes. The electrodes in the half-cell and single cell all exhibited the highest durability using IPA:DPG = 2:6 (η = 27.00 cP) as the dispersion solvent in this work, embodied by its ECSA loss rate, and the cell potential loss was minimum after AST. The ECSA loss mechanism showed that a fine catalyst/ionomer interface structure was created for the highest durability electrode by regulating the η values of the solvent, and the carbon corrosion loss (le) and Pt particle dissolution loss (ld) were weakened. Based on the molecular dynamics (MD) simulation and 19F NMR spectra results, the solvent ratio (various η and similar ε and δ) affected the dispersion states of the ionomer. For the catalyst inks with the highest durability (IPA:DPG = 2:6), the Nafion backbone and side chain presented a higher mobility behavior in the solvent and tended to show the structure of extension separation and the respective aggregation of hydrophilic/hydrophobic phases. Meanwhile, Pt slab models suggested that the side chain of Nafion more easily adhered to the Pt interface zone, while the backbone was pushed toward the carbon support interface zone as more DPG molecules distributed on the Pt surface, which reduced the dissolution of Pt particles and the corrosion of the carbon support. These catalyst/ionomer interface structures tailored by regulating the solvent η values provide insights into improving the electrode durability.

Boerelasins A-D, Four Unprecedented Cytochalasins from the Endophytic Fungus Boeremia Exigua.

Four undescribed cytochalasins (1-4) were isolated from the endophytic fungus Boeremia exigua. Structurally, boerelasin A (1) represents the first example of a cytochalasin with a rare 5/5 bicyclic carbon core. Boerelasin B (2) possesses an unprecedented 5/6/5/6/8 pentacyclic ring system. Boerelasin C (3), a derivative from the common biosynthetic intermediate to 1, is a macrocyclic ring-opening cytochalasin, and boerelasin D (4) contains an uncommon six-carbon alkyl acid side chain. The structures were elucidated based on spectroscopic methods, electronic circular dichroism, spin-spin coupling constants, and calculated nuclear magnetic resonance with DP4+ analysis. These compounds exhibited significant cytotoxicity against the tumor cells.

Generation and characterization of two induced pluripotent stem cell lines from conjunctiva of a retinoblastoma patient.

Retinoblastoma (RB) is a common intraocular malignancy mostly caused by variation of the tumour suppressor gene RB1. In this study, we successfully generated two induced pluripotent stem cell (iPSC) lines from an infant with non-heritable RB. Both cell clones exhibited typical iPSC characteristics with normal karyotypes, consistent pluripotency markers expression and the capability of trilineage differentiation.

Behavior analysis and formative assessments in online oral medicine education during the COVID-19 pandemic.

BACKGROUND: During the coronavirus disease 2019 (COVID-19) pandemic, traditional teaching methods were disrupted and online teaching became a new topic in education reform and informatization. In this context, it is important to investigate the necessity and effectiveness of online teaching methods for medical students. This study explored stomatology education in China to evaluate the development and challenges facing the field using massive open online courses (MOOCs) for oral medicine education during the pandemic. AIM: To investigate the current situation and challenges facing stomatology education in China, and to assess the necessity and effectiveness of online teaching methods among medical students. METHODS: Online courses were developed and offered on personal computers and mobile terminals. Behavioral analysis and formative assessments were conducted to evaluate the learning status of students. RESULTS: The results showed that most learners had already completed MOOCs and achieved better results. Course behavior analysis and student surveys indicated that students enjoyed the learning experience. However, the development of oral MOOCs during the COVID-19 pandemic faced significant challenges. CONCLUSION: This study provides insights into the potential of using MOOCs to support online professional learning and future teaching innovation, but emphasizes the need for careful design and positive feedback to ensure their success.